CB11 / CB33Photos and drawings on request
Holdvolt CB11 / CB33
Central Battery System for Emergency Lighting, 0.5–100 kVA
Battery-backed supply for emergency lighting and evacuation equipment, built to the autonomy your design needs.
- 0.5–100kVA
- Single- and three-phase
- 90min
- Standard autonomy
- ≤3ms
- Transfer, on request
Features
0.5–100 kVA
System
- Sine wave output
- LCD
- Full protection set
Specifications
Factory catalog values, model by model.
Single-phase, 0.5–10 kVA
| Model | CB11 |
|---|---|
| Other | |
| Operating mode | Single-phase in / single-phase out; three-phase in / single-phase out |
| Power range | 0.5-10KVA |
| Protection | Over-voltage, under-voltage, output overload, over-current, battery over-charge, over-discharge, over-temperature |
| Input | |
| Input voltage | AC220V±20% |
| Input phases | Single-phase, two-wire + PE |
| Input frequency | 50HZ±1% |
| Output | |
| Output voltage | AC220V±3% |
| Output phases | Single-phase, two-wire |
| Output frequency | 50HZ±0.1% |
| Waveform | Sine wave |
| Transfer time | |
| Transfer time | Standard ≤0.25 s; ≤3 ms on request |
| Battery | |
| Backup time | 90 min standard; longer to design |
| Display & communication | |
| Display | LCD |
| Environment | |
| Noise | Silent on mains; ≤50 dB in emergency mode |
| Humidity | 0-95% |
| Temperature | -10 to 40 °C (25 °C optimum) |
| Altitude | ≤2500M |
Factory values. Specifications may change; confirm against the quotation.Swipe the table sideways.
Three-phase, 5–100 kVA
| Model | CB33 |
|---|---|
| Other | |
| Operating mode | Three-phase in / three-phase out |
| Power range | 5-100KVA |
| Protection | Over-voltage, under-voltage, output overload, over-current, battery over-charge, over-discharge, over-temperature |
| Input | |
| Input voltage | AC380V±20% |
| Input phases | Three-phase, four-wire + PE |
| Input frequency | 50HZ±1% |
| Output | |
| Output voltage | AC380V/220V±3% |
| Output phases | Three-phase, four-wire + PE |
| Output frequency | 50HZ±0.1% |
| Waveform | Sine wave |
| Transfer time | |
| Transfer time | Standard ≤0.25 s; ≤3 ms on request |
| Battery | |
| Backup time | 90 min standard; longer to design |
| Display & communication | |
| Display | LCD |
| Environment | |
| Noise | Silent on mains; ≤55 dB in emergency mode |
| Humidity | 0-95% |
| Temperature | -10 to 40 °C (25 °C optimum) |
| Altitude | ≤2500M |
Factory values. Specifications may change; confirm against the quotation.Swipe the table sideways.
Questions buyers ask
Is it certified to EN 50171?
No. The system is designed to the factory’s national standard. Tell us the code your project must meet and we will confirm what can be supplied.
Can the unit carry our brand?
Yes. Logo, front panel, packaging and manual can be supplied under your brand. Minimum quantities and lead times are on the OEM / ODM page.
What do you need for a quotation?
Load in kVA or kW, input voltage and phases, output phases, the backup time you need and where the unit will be installed. If you are unsure, send what you know and we will ask for the rest.
More in Systems & Accessories
Five numbers get you a quote
Send what you know. We reply within one working day.
- LoadkVA or kW, and what it is
- Input voltage and phasese.g. 400 V three-phase, 50 Hz
- Output phasesSingle- or three-phase
- Backup timeMinutes at full or typical load
- SiteIndoor, temperature, altitude, generator